|Recommendations for Finding a Contractor|
|Recommendations for Finding a Contractor
For many, finding the right contractor is the biggest hurdle to improving their home. Below is a list of different types of contractors you may need to hire. Under each type is a brief description of the service they provide and questions or suggestions for working with them. In addition, the Federal Trade Commission offers general tips for hiring a contractor that you should always follow.
Home Energy Raters
A Home Energy Rater is a specialized contractor who performs a standardized evaluation of the energy efficiency of your home. The evaluation includes:
air leakage test of your home and duct work
home energy rating
Home Energy Raters typically perform the role of an independent consultant, but some will offer to make improvements.
An Energy Auditor performs an evaluation of the energy efficiency of your home that may or may not be as comprehensive as a home energy rating.
Finding an Energy Specialist
To find a home energy rater visit the Residential Energy Services Network
Energy audits are often provided by utilities for free or at a discounted rate. Contact your electric or gas utility and ask if they offer an energy audit.
Tips for working with an Energy Specialist
Ask how long the evaluation will take (a comprehensive evaluation can take about 3 hours depending on the size of the home)
Ask if they will provide a list of improvements
Ask if they will make any of the improvements
Ask if they can recommend someone who can make the improvements
Home Performance with Star
Find out if is available in your area. A qualified contractor inspects your home and recommends customized and cost-effective energy and comfort improvements.
Select State California Colorado Georgia Idaho Massachusetts Minnesota Missouri New York Texas Wisconsin
Heating and Cooling Contractors
A Heating and Cooling Contractor is a specialized contractor who installs and services heating, cooling and ventilation equipment. They sell, service and install ducts, programmable thermostats, furnaces, boilers, central air conditioners, and heat pumps. Some contractors provide specialized services like air balancing, duct sealing and energy or comfort audits.
Tips for working with a Heating and Cooling Contractor
Ask if the installation or service technician, who will work on your system, is certified by . NATE is the leading industry-supported testing and certification program for technicians.
Ask if there are special offers or rebates available for purchasing Star qualified equipment.
Ask the contractor to size your new equipment to meet the needs of your house. A bigger system isn't always better. New equipment should be sized based on the size of your house, level of insulation, type of windows and other factors. The Manual J, from the Air Conditioning Contractors of America (ACCA), is a common method used by contractors to properly size heating and cooling equipment.
Ask the contractor to inspect your ducts for air leaks and insulation if you have a forced-air system (i.e. furnace, heat pump or central air conditioner). It is especially important to check ducts located in an attic or crawlspace.
Ask the contractor for an itemized estimate of the work and equipment they propose.
Air Sealing Contractors
An Air Sealing Contractor is a specialized contractor that seals air leaks in the building's envelope (a key part of ). They commonly use spray foam and other materials to seal bypasses, gaps, and cracks in attics, basement, walls and floors.
Finding an Air Sealing Contractor
Air Sealing Contractors are not commonly listed in the yellow pages under "air sealing". To find an air sealing contractor contact a Home Energy Rater in your area and ask if they perform air sealing services or can refer you to someone who does. To find a home energy rater visit the Residential Energy Services Network
Air Sealing is a common improvement offered through the U.S. Department of Energy's Weatherization Assistance Program. State weatherization contacts may be able to refer you to an air sealing contractor in your area.
Tips for working with Air Sealing Contractors
Ask if they measure air leakage before and after sealing using a blower door.
Ask if they will test the safety of combustion appliances after sealing.
Air Sealing should be completed before adding insulation. Some Air Sealing contractors also install insulation or can recommend an insulation contractor they typically work with.
Ask if they install insulation or can refer an insulation contractor.